| Model |
Description (model) |
Capacity |
Price |
 |
Wire Terminal Grips (G1001, G1001-1, G1001-2)
Pull testing of wire and tube terminals/crimps, and other slender samples |
200 lb |
$218 |
 |
Dual Roller Grip (G1002)
Pull testing of wires, tubes, and other slender samples |
200 lb |
$171 |
 |
Film & Paper Grips (G1008, G1015-1, G1015-2, G1015-3)
Tensile testing of film, paper, and other thin materials |
100 lb |
from $237 |
 |
Pneumatic Grip (G1046, AC1019 Connection Kit)
Tensile testing of film, paper, and other thin materials |
100 lb |
$570 |
 |
Parallel Jaw Grip (G1013)
General tensile testing |
200 lb |
$180 |
 |
Mark-10 G1061 Self-Tightening Wedge Grip 1200 lb (5.3 kN) Capacity |
1200 lb |
from $470 |
 |
Miniature Component Grip (G1003)
For a variety of pull-off tests |
30 lb |
$133 |
 |
Padded Attachments (G1019, G1020, G1021)
Padded attachments for ergonomics analysis and job task analysis |
500 lb |
from $38 |
 |
Bottle Grip (G1023)
Torque and top-load testing of closures, bottles |
100 lb-in |
$475 |
 |
Cap Grip (G1053)
Secures bottle caps during torque testing |
100 lb-in |
$308 |
 |
Jacob's Chuck Grip for TST (G1022-1, G1022-2, G1022-3)
Secures a fixture or sample during torque testing |
100 lb-in |
from $171 |
 |
Compression Plates (G1009, G1009-1)
Compresses samples during testing |
200 & 500 lb |
from $38 |
 |
Rubber Tip (G1011)
Simulates a human finger in compression testing |
50 lb |
$28 |
 |
Swivel Adapter (G1018, G1018-1)
Swiveling adapter, for use between gripping fixtures |
200 & 500 lb |
$61 |
 |
Series STH Attachments (G1016-1, G1016-2, G1016-3, G1017)
Secures fixtures, bits, or samples during torque testing, attaches to STH torque sensors |
100 lb-in |
from $118 |
 |
Jacob's Chuck Grip (Force) (G1010)
Secures a fixture or sample during tensile testing |
30 lb |
$95 |
 |
Hooks (G1028, G1038, G1035, G1042)
General tensile testing |
up to 1000 lbs |
from $19 |
 |
Flat Heads (G1029, G1036)
General compression testing |
200 & 500 lb |
from $19 |
 |
Extension Rods (G1024, G1024-1, G1024-2, G1031, G1031-1, G1031-2)
For use between force gauges, test stands, and other grips or attachments for general tensile and compression testing |
200 & 500 lb |
from $19 |
 |
Chisel Points (G1025, G1032)
Compression testing |
200 & 500 lb |
from $19 |
 |
Cone Points (G1026, G1033)
Compression testing |
200 & 500 lb |
from $19 |
 |
V Grooves (G1027, G1034)
Compression testing |
200 & 500 lb |
from $19 |
 |
Thread Adapters (G1050, G1051, G1039, G1030, G1047, G1048, G1040, G1037, G1049, G1041)
For use between force gauges, test stands, and other grips or attachments |
up to 1000 lbs |
from $19 |
