With the Imada SV-05 micro movement precision wheel test stand, one stand does both compression (push) and tension (pull) tests. Maximum 4.4 lb capacity, 2.75" stroke, reduced backlash and fine movement for highly precise measurements.

Imada SV-05 Micro Movement Precision Wheel Test Stand Price: $1250 currently in stock Shipping Weight: 30 lbs. (estimate shipping cost) Quantity:   This Month Only! FREE UPS Ground Shipping on ALL Imada test stands

• One stand does both compression (push) and tension (pull) tests
• Reduced backlash and fine movement for highly precise measurements
• Stroke 2.75" (travel distance per knob rotation 0.9”/22.5mm)
• Maximum Load 4.4 lbs (2 kg)

Features:

• Ergonomic and light weight, yet ruggedly constructed
• Available in: lbf-in, oz-in, kg-cm, N-cm and N-m (specify units when ordering)
• Peak, Real Time and Peak Down measuring mode (selectable)
• 400 data memory for recall or for SPC download
• Programmable High and Low setpoints with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
• Programmable screw tightening counter
• Programmable Auto Zero function resets unit to zero for easy operation
• Clockwise and Counterclockwise operation
• RS-232 output for SPC capability
• Runs on internal NiCad batteries (for 8 hours) Auto shut-off after 10 minutes of non-use
• AC charger and clockwise stepless one-way clutch adapter included.

Imada DW-15 digital torque wrench is ergonomically designed, extremely lightweight and good for use as a production tool. It tightens or loosens bolts up to 130 lb-in, yet can be used in difficult to reach places. Torque controlled wrenches can also be evaluated by comparative tests on a given fastener. Both breakaway and loosen tests can be performed.

The Imada DSW-15 torque tester has an accuracy of +/-0.5%, +/- 1 LSD. It offers a programmable setpoint for uniform tightening or Go/No Go testing and also provides data for SPC (statistical process control) via the RS-232 port.

The Imada DSW-15 digital torque wrench reduces scrap and rework costs by eliminating over and under tightening. It is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assenblies.

Specs

DSW-15 Ranges (Accuracy: +/-0.5% F.S. ±1 LSD Model Capacity lb-in 3-130 lb-in (factory standard) oz-in 30-2100 oz-in kg-cm 3-150 kg-cm N-cm 100-1500 N-cm N-m 1-15 N-m