A large working area and 5 inch (130 mm) throat is perfect for large sample testing. The platform features pre-drilled holes for custom fixturing or for use with Chatillon grips and fixtures. The crosshead travel is selectble in either inches per minute or millimeters per minute. The speed range is 0.2 to 20 inches per minute (5 to 500 mm/min). A dial is used to set the speed requirement and a digital display indicates the speed selected to 0.1 resolution. Crosshead travel is 15 inches (380 mm). An Up and Down switch is used to control crosshead travel direction. A simple switch setting can be used to reverse crosshead speed direction at maximum speed at the completion of a test. An emergency stop is located on the console for easy access. Mechanical limits may be set to stop crosshead travel at a specified position. Rules are provided on the front face and crosshead face of the column for accurate placement and for measuring extension. Positive bracking ensures a precise stop.

Specs

• 110 pound capacity (500 N)
• Crosshead Speed: 0.2 to 20 in/min (5 to 500 mm/min)
• Speed Accuracy: +/-3% at full capacity
• Travel: 15 inches (380 mm)
• Load Measurement: Chatillon force gauge
• Supply Voltage: 110/230 VDC
• Operating Temperature: 40 to 100 °F (5 to 45°C)
• Tensile, Compressive, Peel and Flexural testing
• Compact, benchtop design
• Simple operation with intuitive controls
  • crosshead direction
  • return speed
  • speed selection
  • emergency stop
  • on/off
• Mechanical Limits and Positive braking
• Large Working Area and Throat for large samples
• Selectable Display with Digital Speed Readout
  • inches per minute
  • millimeters per minute
• 1 year warranty

Click here for Brochure
(Adobe PDF)